Stainless Steel Bars, Steel Types And Applications
Stainless steel products like stainless steel bars, medical bars, etc. are typically formed from a wide range of stainless steel types.
All manufacturing sites and construction industries are in pursuit of stainless steel materials like stainless steel bars, steel round bars, steel rods, etc. that can help them complete each of the processes they have to create a better production.
Well, typically stainless steel products are also formed from a lot of stainless types. And so, therefore, manufacturers can decide where such stainless steel types can be best applicable.
Major Stainless Steel Types
Basically, there exist major kinds of stainless steel types: the austenitic, the martensitic, and ferritic. And these stainless steel types are used in different applications and industries – chemicals, automotive, kitchenware, medical, pharmaceuticals, etc.
- First in line is the austenitic stainless steel. This type of stainless steel contains austenite in its first phase. Austenitic is the most common type of steel due to its versatility that it can be fabricated and formed with accurate results.
Austenitic stainless steel is known for its toughness and ductility. If these steels are processed and delivered as hard rolled and cold stretched, they can have an increased strength and hardness. On the other hand, if these steels are processed and delivered through a quench-annealed state, they can be very formable and soft. Different types of stainless steel bars can be formed from austenitic stainless steel. Basically, austenitic stainless steel is highly used in food processing, power plants, and chemical plants.
- Another type of stainless steel that is also common in the manufacturing industry is the martensitic stainless steel. This type of steel contains higher amounts of chromium but lesser amounts of other alloying metal like nickel. Well, this type has quite similarities with ferritic but it has higher levels of carbon that can reach up to full 1%. This only means that it can be hardened and tempered. Thus, this can be useful in common situations where the steel’s strength is much more significant than its corrosion resistance.
Martensitic stainless steel is hardened through heat treatment which makes these steels become more brittle and stronger. This type of stainless steel is designated up to 400 series. In addition, these steels are mainly used for surgical or medical instruments and in oil industries. One of the stainless steel products created for these areas like medical operations is the medical steel bar.
- Among the most commonly used stainless steels in various industries and has gained high demand is the ferritic stainless steel. This type of stainless steel has a less amount of carbon content, about 0.10% only. These steels are also magnetic. Unlike martensitic that can be hardened by heat treatment, ferritic stainless steels are incapable of being hardened through heating. The series of grades of this steel is mainly developed to resist corrosion and oxidation, especially stress cracking corrosion (SCC).
These steels don’t weld to high standard limits but they are appropriate for a vast range of applications. Ferritic steels have elevated content of chromium and have low carbon contents. Aside from being magnetic, they are also ductile and have high resistance to corrosion. Therefore, this type of steel is typically applied in the manufacturing of automotive parts, industrial equipment, and kitchenware. Ferritic steel is affordable for the reason that they contain less chromium and nickel.
Stainless steel bar can be made from those types of stainless steels, depending which can be best appropriate for a certain application – industrial, mechanical, chemical, hardware, or medical.
This best explains why stainless steel products like bars, rods, etc. are so highly in demand. Stainless steel has such a very wide range of uses.
Best Pick in Steel Products and Services
Among the vastness of today’s steel product and service provider, Forte Precision Metals, Inc. supplies all the necessary steel products and services upon the completion of any manufacturing process or construction.
The wide range of stainless steel types and grades that Forte Precision Metals produces has brought the great advantage.
Forte Precision Metals also has a complete range of essential metal working and machining operations like centerless grinding, bar abrasive cutting, bar chamfering, etc.
Looking for more products and services that can help in manufacturing parts, call or contact us now at 847-451-8888.